Station operations library
Guides for getting on air and staying there
Practical procedures for small radio stations, churches, schools, DJs and podcasters: connect an encoder, stream a service live, put a player on your website, point a domain. Each one is written step by step and checked before it is published.
Radio stations
- 001 RadioBOSS broadcast settings: connect, encode, and confirm you are on air RadioBOSS broadcast settings for Icecast and SHOUTcast: server type, address, mount or stream ID, password, format, track titles, and how to confirm you are on air.
- 002 Stream OBS audio to an Icecast mount with the custom FFmpeg output How to stream OBS Studio audio to an Icecast mount with the custom FFmpeg output: the icecast:// address, container, codec, bitrate and usual faults.
- 003 Stream radio from your Mac: encoder, audio routing and server settings How to stream radio from a Mac: pick BUTT or Mixxx, route Music or Spotify audio with BlackHole, and fill in Icecast or SHOUTcast settings that stay on air.
- 004 Radio microphone setup: from the capsule to your live stream Radio microphone setup for internet radio presenters: dynamic or condenser, USB or XLR, setting gain, quieting the room and checking levels before you go on air.
- 005 Run a multiple bitrate radio stream: a full feed, a light feed, and who hears which Why a station runs a multiple bitrate radio stream, how listeners end up on the high or the low feed, and how to set up and check the extra streams.
- 006 Remote DJ setup for radio: putting guest presenters on air Remote DJ setup for internet radio: a login and slot for each presenter, the encoder settings to send them, the AutoDJ hand-over and a pre-show checklist.
- 007 Build a radio hour clock: categories, IDs, breaks and dayparts How a radio hour clock works: music categories, station IDs, ad breaks and talk slots, dayparts, the US webcasting rules, and running the clock through AutoDJ.
- 008 Schedule multiple DJs on one internet radio station How to schedule multiple DJs on an internet radio station: one login each, fixed slots, one station time zone, clean hand-overs and a line-up listeners can read.
- 009 RadioDJ streaming setup: from the playout PC to your listeners RadioDJ streaming setup, step by step: route its audio into BUTT, send it to an Icecast or SHOUTcast server, pass song titles across, and check it is on air.
- 010 Choosing the bitrate for your internet radio stream The best bitrate for internet radio by format: MP3 or AAC, mono or stereo, data per listener per hour, and how to match your encoder to your plan's ceiling.
- 011 Set up AutoDJ radio so your station plays around the clock How to set up AutoDJ radio for your station: load the music library, build playlists, plan the week, pass the stream to a live DJ, then confirm it is on air.
- 012 Radio loudness in LUFS: targets, true peak and a level playlist Radio loudness in LUFS explained for internet stations: what the meter reads, which targets the EBU publishes, and how to level a playlist and a live show.
- 013 Internet radio listener statistics: what each figure counts and how to read it How to read internet radio listener statistics: listeners now, peak, sessions and listening time, where each figure comes from and what it cannot tell you.
- 014 SAM Broadcaster stream setup: add the encoder and go on air SAM Broadcaster stream setup for Icecast or SHOUTcast: add the encoder, match format and bitrate to your plan, send song titles, then confirm you are on air.
- 015 Icecast mount points: what they are and how to set yours What an Icecast mount point is, how your encoder and your listeners use it, how fallback mounts carry the audience, and which encoder fields must match.
- 016 Radio show prep: run sheet, timing, music, levels and the log Radio show prep for presenters and station managers: a run sheet to copy, timing to hard posts, music cleared and loaded, levels on a meter, and an after-show log.
- 017 Radio audio processing before the encoder: levels, compression and limits Radio audio processing for an internet station: EQ, compression, AGC and a true-peak ceiling before the encoder, with loudness targets and signs of over-processing.
- 018 SHOUTcast vs Icecast: what actually changes for your station SHOUTcast vs Icecast for an internet radio station: licence, codecs, now-playing metadata, several streams, directory listing and which encoders connect.
- 019 Add a Listen Live button to your website How to add a listen live button to your station's website: the HTTPS link, the code, where it goes, how it behaves on phones and what to check first.
- 020 Radio stream fallback source: a chain that keeps your station on air How a radio stream fallback source works: Icecast fallback mounts, AutoDJ taking over when a live DJ drops, silence that hides a dropout, and checks to run.
Live video
- 021 1080p streaming bitrate: what to set, what it needs, what to drop to The 1080p streaming bitrate to set, the frame rate to pick, the upload speed it needs, why CBR and 2-second keyframes, and what to drop to on a weak line.
- 022 Hardware streaming encoder setup, from network port to first frame Hardware streaming encoder setup for RTMP: network, server address and stream key, H.264 keyframes, bitrate, embedded audio and the checks to run before air.
- 023 Keyframe interval for streaming: the 2-second setting and how to prove it held The keyframe interval for streaming to HLS players: why 2 seconds, fixed, is the value to use, where OBS, vMix, Wirecast and FFmpeg keep it, and how to verify it.
- 024 Stream key leaked: take your channel back and keep the new key private Stream key leaked? How to spot someone else using it, replace it, update every encoder that holds the old one, and keep the new one private for good.
Apps
- 025 A Samsung TV app for your streaming channel: from Seller Office to the living room How a streaming channel gets its own Samsung TV app: Seller Office membership, Tizen certificates, store images, certification and what to prepare first.
- 026 An LG TV app for your streaming channel: from package to LG's store How to publish an LG TV app for your streaming channel: the Seller Lounge account, the .ipk, the self-checklist, the UX scenario and LG's QA review.
- 027 Publish your radio app on Google Play: the run sheet from account to review How to publish a radio app on Google Play: developer account, store listing, content rating, Data safety, the closed test for new personal accounts, and review.
- 028 Publish your radio app on the App Store: the full checklist What a station needs to publish a radio app on the App Store: developer account, background audio, privacy label, App Review rules and the submission order.