Stream radio from your Mac: encoder, audio routing and server settings

To stream radio from a Mac you need three things: an encoder app such as BUTT or Mixxx, a way to get your microphone and music into it, and the host name, port, mount and password of an Icecast or SHOUTcast server. This run sheet covers each link of that chain on macOS, the settings to copy, and how to confirm the signal is really out before you announce the show.

Steps
8
Reviewed
Runs on
Radio
Written by
Get Stream Hosting

By the Get Stream Hosting team

Every step was checked against the software's official documentation by independent reviewers before publishing. Last reviewed .

Pre-flight check

The signal chain, end to end

Every Mac broadcast follows the same path. Sound enters the Mac, an encoder compresses it, and the encoder pushes it to a streaming server that hands copies to listeners. Your Mac only sends one copy, so its upload carries one stream no matter how many people tune in.

StageOn the MacWhat to check
SourcesMicrophone, mixer or USB interface; music appsInput appears in the encoder's device list
RoutingBlackHole virtual device, Multi-Output DeviceYou still hear the music while it is sent
EncoderBUTT, Mixxx, or the browser studioMeters move; codec and bitrate set
ServerIcecast or SHOUTcast at your hostHost, port, mount and password match the panel
ListenersHTTPS listen link and playerListener count rises when you open the link

The server end is what a hosted HTTPS radio stream provides: Icecast by default, with one switch in the control panel that moves the station over to SHOUTcast DNAS 2.6. The listen link is HTTPS, so the player works on secure websites without mixed-content warnings.

Which encoder suits your show

Pick the encoder by what you do on air, not by feature count. All of these connect to the same station.

EncoderBest forNotes from its own documentation
BUTTTalk shows, a mixer feeding the Mac, music played from another appStreams Ogg Vorbis, Ogg Opus, Ogg FLAC, MP3 and AAC+; it cannot play files itself, so music comes in through an input
MixxxDJ sets mixed on the MacBroadcasts MP3 or Ogg Vorbis to Icecast 2, Icecast 1 or SHOUTcast 1; sends each track's artist and title
Browser studioGoing live with nothing installedPremium and Platinum: mixes mic and music in a browser tab, up to 256 kbps, with a silence warning
OBS StudioStations already producing video in OBSThe project describes it as software for video recording and live streaming; for audio-only radio the tools above are the shorter path

SHOUTcast accepts MP3 only from Mixxx, and Mixxx's manual says a SHOUTcast 2 server refuses the connection unless you fill in a stream name. If your station runs on SHOUTcast, set MP3 and a stream name.

Getting music from other apps into the encoder

BUTT sends whatever arrives on an audio input, so music playing in Music, Spotify or a browser needs a virtual cable. BUTT's manual names BlackHole for this on macOS. BlackHole is a free, open-source loopback driver for macOS 10.10 and later, on Intel and Apple silicon, with no kernel extension. Install it from its site, or with Homebrew:

brew install blackhole-2ch
  1. Close your audio apps, run the installer and restart if it asks.
  2. Open Audio MIDI Setup, click the Add button under the sidebar and choose Create Multi-Output Device.
  3. Tick Use for your speakers or headphones and for BlackHole 2ch. Keep your speakers as the top device, and turn on drift correction for every device except the clock source, as BlackHole's notes advise.
  4. Right-click the Multi-Output Device and choose Use This Device For Sound Output.
  5. In the encoder, pick BlackHole 2ch as the input.

Confirm it: play a track in Music and watch the encoder's meters move while you still hear it in your headphones.

macOS will not let you change the volume of a Multi-Output Device. Set each device's level in Audio MIDI Setup, or ride the level in your encoder. To mix a microphone with that music, run the mic into a hardware mixer, or use Mixxx, which takes both.

Settings to copy into BUTT

  1. Download the .dmg from the BUTT site, open it and drop butt onto the Applications folder.
  2. Open the settings, choose the Main tab and click ADD under the server list.
  3. Choose Icecast or SHOUTcast to match your station, then copy in the address, port and password (plus, for Icecast, the mountpoint and user) shown in the encoder settings of your control panel. In the lower right, click ADD.
  4. Leave Use SSL/TLS off unless your encoder settings say to use it; the manual warns the connection fails if the server does not support it.
  5. Under Audio, pick the input device (your interface, or BlackHole 2ch), Stereo or Mono, the codec and the bitrate.
  6. Fill in the stream information (description, genre, web address). It cannot change mid-broadcast; BUTT applies it on the next connection.
  7. Click play.

Confirm it: the > symbol on BUTT's display and the play button turn yellow once connected. BUTT keeps retrying until you press stop and reconnects by itself after a drop.

Song titles: BUTT can read the playing track from Music (iTunes), Vox or Spotify on macOS, from a text file, or from a URL. If you choose Opus, BUTT resamples to 48 kHz, so set the device to 48 kHz to skip the conversion.

Settings to copy into Mixxx

  1. Open Preferences > Live Broadcasting.
  2. Set Type (Icecast 2 or SHOUTcast 1), then Host, Port, Login, Password and Mount, copied from your control panel. Put the bare host name in Host, never a full URL.
  3. Under Encoding, choose Format (MP3, or Ogg Vorbis on Icecast) and Bitrate.
  4. Fill in Stream name, and tick Enable UTF-8 metadata if your titles carry accents or non-Latin script.
  5. For a mic: Preferences > Sound Hardware > Input, set Microphone 1 to your interface, then click Mics and Talk while you speak. The Strength knob sets how much the music drops beneath your voice.
  6. Start with Options > Enable Live Broadcasting.

Confirm it: open your HTTPS listen link on your phone, then check that the live listener count in the control panel goes up by one. Mixxx sends each track's artist and title by default, so the player's now-playing line should change at the next track.

Checks before you go live

  • Microphone access: System Settings > Privacy & Security > Microphone, and switch on BUTT or Mixxx. Flat meters with the mic plugged in usually mean this is off.
  • No sleep: on a laptop, System Settings > Battery > Options > Prevent automatic sleeping on power adapter when the display is off. On a desktop, the same switch is under Energy.
  • Bitrate within your plan: 32 kbps on Free, 128 kbps on Premium, up to 320 kbps on Platinum. Talk sits well at 32; music wants 128 or more.
  • One encoder per slot: each DJ connects with their own account in their own hours on paid plans, so nobody shares one Mac.
  • Test from outside: use mobile data on a phone, not the Mac that is sending.

When it goes wrong

  • Encoder never connects: recheck host, port and password character by character; a URL typed into Mixxx's Host field fails.
  • Connected, but silence: wrong input device, or microphone access off for the app.
  • You hear nothing locally after installing BlackHole: sound output is set to BlackHole alone. Switch it to the Multi-Output Device.
  • Clicks or glitches after a few minutes: drift correction is off on a device in the Multi-Output set.
  • Wrong or broken titles: turn on UTF-8 metadata in Mixxx, or point BUTT at the right player.
  • SHOUTcast rejects Mixxx: use MP3 and fill in a stream name.

Still stuck? Open a chat or a ticket. Chat is staffed day and night by an assistant able to look at your account, and you can ask for a human at any point.

What the station adds behind your Mac

A Mac is a fine studio but a poor transmitter: it sleeps, updates and travels. Keep it as the studio and let the server do the rest. On paid plans AutoDJ plays your uploaded music around the clock and steps aside the moment you connect, so the stream never drops to silence between shows. Premium and Platinum alert you to dead air and record each live show into the library; Platinum adds a backup source and has your encoder reach the nearest of five cities, with its settings in the control panel's Radio section.

On the free plan you get a single live stream, fed by any Icecast or SHOUTcast encoder, which is enough to rehearse the whole chain above. If you also film the show, the same desk runs live video channels over RTMP from OBS.

Not the right fit if you need your Mac itself to serve listeners directly: a home connection uploads one copy per listener, and Mixxx's manual notes the server ports must be opened on your router. Here the Mac sends one stream and the server fans it out.

Questions people ask

Do I need special hardware to broadcast from a Mac?

No. A built-in or USB microphone and headphones are enough to start. A USB audio interface or small mixer gives cleaner levels and lets you blend several sources before they reach the encoder.

Can I send Spotify or Apple Music output straight to my station?

The audio can be routed with BlackHole into BUTT or another encoder. Whether you may broadcast a given recording is a licensing question, not a technical one. Our stations keep an airplay log and produce royalty reports for the usual collecting societies, but the licences themselves are yours to hold.

Which is better on a Mac for radio, BUTT or Mixxx?

BUTT is a plain encoder: it sends whatever input you give it, which suits talk shows and a hardware mixer. Mixxx is DJ software with broadcasting built in, so it plays the tracks, mixes the microphone and sends the stream. Both are free.

Can I go live from a Mac without installing anything?

Yes, on Premium and Platinum. The browser studio mixes your microphone and music in a browser tab and sends it to the station (256 kbps maximum). It also processes the sound and warns you when the air goes silent.

What happens to my stream if the Mac goes to sleep?

The encoder stops sending and listeners lose your live feed. On paid plans AutoDJ takes over when no DJ is live, so the station keeps playing. Turn on the no-sleep setting before long shows.

Radio

Put your Mac on air

Open a station, paste its encoder settings into BUTT or Mixxx, and check the listener count from your phone.