Remote DJ setup for radio: putting guest presenters on air

A remote DJ setup for radio comes down to four things: each presenter gets their own login limited to their own hours, a short card of encoder settings, an automation that steps aside when they connect, and a checklist they run before the slot opens. Get those right and a guest in another city sounds like part of the station. This guide is the run sheet for all four.

Steps
7
Reviewed
Runs on
Radio
Written by
Get Stream Hosting

By the Get Stream Hosting team

Every step was checked against the software's official documentation by independent reviewers before publishing. Last reviewed .

Pre-flight check

How a remote show reaches your listeners

The presenter's computer runs an encoder, the encoder sends one audio stream to your station server, and the server passes it on to every listener over the same listen link they already use. Nobody needs to sit at the station's machine. The DJ needs a microphone, their music, an encoder and an upload that holds steady for the length of the show.

  1. Microphone and music are mixed on the DJ's computer, in the encoder or in DJ software such as Mixxx.
  2. The encoder logs in to your station with the DJ's own username and password.
  3. The station hears a live source and takes the air from AutoDJ.
  4. When the DJ disconnects, AutoDJ picks the programme back up.

On our SSL radio streaming plans, AutoDJ steps aside the moment a live DJ connects, and the hand-over back is automatic on Premium and Platinum. Encoders that work include BUTT, Mixxx, SAM Broadcaster, RadioBOSS, OBS (audio only) and any other Icecast or SHOUTcast source.

One login and one slot per presenter

Give every presenter a separate DJ account rather than sharing the station's main source password. Separate logins mean you can see who is on air, change one person's password without touching the rest, and stop a guest from cutting into somebody else's show, because each account is limited to its own hours.

PlanDJ accountsLive hand-overExtras for guests
FreeNone: one live stream from any encoderLive only, no AutoDJNone
PremiumUp to 5, each with its own hoursAutomatic to the DJ and back, emergency cutLive shows run from a browser tab and each one is saved to the library
PlatinumUp to 20As Premium, plus gapless DJ hand-offGuest links with no account needed, a backup source, a standby slot

Create the accounts and their hours in the control panel (the radio dashboard user guide in our knowledgebase shows where live DJs and encoder settings sit). On the Free plan there is a single live source, so remote presenters would share one set of credentials. That works for a two-person station, but plan on Premium once you have a rota.

When a presenter leaves the rota, delete or disable their account the same day. A forgotten login is the usual way an old guest ends up back on air.

The settings card to send each DJ

Copy the values from the encoder settings in your station's control panel and send each DJ their own card. Send the password separately from the rest, by a different channel, and never in a public group chat.

Server type:  Icecast 2 (or SHOUTcast, if your station runs SHOUTcast)
Host:         <host name from the control panel, no http:// and no port>
Port:         <port from the control panel>
Mount:        <mount from the control panel, starts with />
Username:     <this DJ's own username>
Password:     <sent separately>
Format:       MP3
Bitrate:      <your station's bitrate>
Channels:     Stereo (Mono for talk-only shows)
  • Host is a name, not a web address. The Mixxx manual is explicit that a value such as http://example.com:8000 in the Host box does not work.
  • Mount matters on Icecast. Mixxx notes that Icecast needs the mount and SHOUTcast does not; it always begins with /.
  • Username. Icecast's own default source username is source; your DJ accounts use the username shown in the panel instead.
  • MP3 is the safe format. Mixxx points out that not every player handles Ogg, and that Mixxx streams to SHOUTcast in MP3 only.
  • Bitrate. Match the station. The plan sets the ceiling: 32 kbps on Free, 128 kbps on Premium, up to 320 kbps on Platinum.
  • Platinum stations. The nearest-server encoder settings are in the control panel's Radio section; a presenter's encoder logs in at the nearest delivery city, which relays the show on to your station. Settings already in use stay valid.

Settings to copy into BUTT and Mixxx

Most guests use one of two free tools. Point them at the steps for theirs; the knowledgebase article on entering server details in BUTT walks through the same dialog step by step.

  1. BUTT: open Settings, click ADD, choose Icecast or Shoutcast, fill in the address, port and password, plus user and mountpoint for Icecast, then click ADD at the lower right.
  2. BUTT: keep Use SSL/TLS off unless your encoder settings call for it; the manual warns the connection fails when the server side does not support it.
  3. BUTT: in the Audio tab, set codec MP3 and the bitrate, and choose Stereo or Mono under channel mode.
  4. Mixxx: open Preferences, Live Broadcasting, set Type to Icecast 2 (or Shoutcast 1), fill in Host, Port, Mount, then Login and Password, pick MP3 and the bitrate, click OK, then choose Options, Enable Live Broadcasting.
  5. Mixxx with SHOUTcast: fill in the stream name; the manual says a SHOUTcast 2 server reached over the version 1 protocol rejects the connection without one.

How to confirm it worked: BUTT shows it is connected and the level meters move; Mixxx shows broadcasting as enabled. Then check the station by ear on a mobile, using cellular rather than the DJ's Wi-Fi, and listen for the voice.

BUTT keeps trying to connect, and to reconnect after a drop, until the stop button is pressed. A DJ who walks away with BUTT still running can come back on air when their network returns, so the last step of every show is pressing stop.

Hand-over from AutoDJ, and back

The hand-over is the moment listeners notice, so agree the timing with every guest. On Premium and Platinum the station moves to the live DJ as soon as they connect and returns to AutoDJ when they disconnect, and you have an emergency cut if a show has to come off.

  • Start: the DJ connects at the top of their slot, not earlier, and opens with the station ID so the switch sounds deliberate.
  • Between two live shows: the outgoing DJ disconnects on time; the incoming one connects as soon as they hear AutoDJ back. On Platinum the gapless DJ hand-off and a standby slot close that gap.
  • End: finish the last song, say what comes next, press stop. AutoDJ resumes with the schedule.
  • If a guest drops: AutoDJ fills the air on paid plans, and a dead-air alert warns you once the station goes quiet.

Every live show on Premium and Platinum is saved to the library, so a strong guest show can go back out as a rerun from AutoDJ. A DJ who also wants a copy can tick Start recording when connected on BUTT's Record tab.

Checks before you go live

Send this list with the settings card and ask the DJ to run it ten minutes before the slot.

  1. Wired connection if possible; close uploads, cloud sync and video calls on the same line.
  2. Microphone checked: voice peaks clear of the red, music at a similar level.
  3. Encoder profile matches the card: host, port, mount, username, MP3, bitrate.
  4. Song name set so listeners see who is on; in BUTT, type it into Song Name under the Stream tab.
  5. Phone tuned to the listen link, headphones on, ready to hear the switch.
  6. Station contact to hand: who to message if the connection is refused.

BUTT can also start the stream only once there is signal, and drop it after silence, with its signal-detection options; the manual gives -50 dB as the default threshold. That helps unattended setups, but for a hosted show a person pressing play and stop is clearer.

When it goes wrong

SymptomCheck first
Connection refused straight awayWrong password or username, a URL typed into Host, or the DJ is outside their hours
Connects, but listeners still hear AutoDJWrong mount, or the listener's player is buffering; reload the listen link
Rejected by a SHOUTcast station from MixxxStream name left empty
Audio drops every few minutesThe DJ's upload; try a wired line and a lower bitrate
Station quiet after a showThe DJ left the encoder connected with no audio; ask them to press stop

Stuck mid-show? Our live chat is staffed day and night by an AI helper able to look up your station, and it hands you to a person whenever you ask; or open a ticket. Guests who would rather broadcast with pictures can use live video streaming for a simulcast.

Questions people ask

Can two presenters in different places share one show?

The simplest arrangement is that one of them runs the encoder and the other joins through it. On Premium and Platinum the call-in link lets a co-host or listener call in from a browser, and you pick which caller is put on air. Platinum adds up to 10 phone numbers, brought in through a Telnyx or SignalWire account that you hold yourself.

Does a guest DJ need to install anything?

Not on Premium or Platinum: DJs can use the built-in studio encoder right in a browser tab. Guests who prefer their own tools can use BUTT, Mixxx, SAM Broadcaster or RadioBOSS with the settings card. On Platinum a guest link puts someone on air without an account.

What bitrate should I tell remote DJs to use?

The bitrate your station runs at, in MP3. The plan sets the ceiling: 32 kbps on Free, 128 kbps on Premium and up to 320 kbps on Platinum. A guest on a weak upload is better at a lower setting that stays connected.

What stops a guest from going on air during someone else's show?

Each DJ account is restricted to its own slots, so the login only works in the hours you gave it. Keep the main source password to yourself and give guests DJ accounts. Remove an account when the guest leaves the rota.

Can I run remote DJs on the free plan?

Yes, with limits. The free plan accepts a single live feed sent by an Icecast or SHOUTcast encoder, but it has no DJ accounts and no AutoDJ, so presenters would share one login and the station is silent between shows.

Radio

Put your presenters on air

Set up a login and hours for every presenter, and let AutoDJ fill the air between shows.